Non Contact Fiber Connector
The non contact fiber connectors features with the fiber surface is recessed and an anti-reflection coating on fiber surface. It offers vastly improved optical performance and longevity.
29
Jul
24
Jul
Active Optical Network（AON) and Passive Optical Network(PON)
There are two types of systems for implementing FTTH network deployment: AON (active optical network) and PON (passive optical network). what is the difference?
17
Jul
Fiber Connector Type and Key Parameters
There are various type fiber connectors, the most common types at present are LC, SC, what are their features and which parameters will affect the connector function
12
Jul
MTP or MPO Connector For Your Cabling?
MTP connectors have improved performance and MTP fiber jumper is a type of high-performance MPO connector with more optimized optical and mechanical properties. The appearance design is slightly different, but the two can be interchanged and interconnectedsability compared to MPO connectors
05
Jul
Armored Fiber Jumper and Its Features
Armored fiber jumpers are use the armored cable to have the standard fiber patch cord features but also has the advantages of armored cables to provide good protection for the fiber , ease the installation.
29
Jun
OM5 Fiber Advatanges
OM5 fiber increase the baud rate (PAM4) and increase the number of wavelengths to achieve a higher number of multimode fiber cores to support higher-speed network transmission, and the overall cost and power consumption are much lower Single-mode fiber, in the future it should be widely applied in 200G / 400G / 1T and other large data centers.
25
Jun
What is Fiber Optical Splitter?Which Parameters Affect Its Function
Optical fiber splitter is one of the most important passive devices in the optical fiber link. It is especially suitable for connecting MDF and terminal equipment in passive optical networks
20
Jun
Ways to Faster Network Connection
To achieve faster network connection may consider increase the baud rate by adopting PAM4 coding, adopting MPO/MTP Connectors solution, increasing the wavelengths via CWDM, DWDM, SWDM or use better fiber.
13
Jun
Portable Endface Inspector Assist 5G Network Construction
One primary reason of fiber optic network problems is dirty or damaged fiber connectors. Therefore, how to quickly and efficiently evaluate, diagnose, and analyze problems caused by bad fiber connector endface at the optical network construction or maintenance site is particularly important .