10G Ethernet Media Converter

10G Ethernet media converter provides copper to fiber with 10GBase-T RJ-45 port and one XFP or SFP+ pluggable transceiver port.
By adopting CWDM and DWDM technology, it convert 10GBASE-T interface to WDM wavelength to achieve long distance optical signal transmission and expand fiber capacity and bandwidth.
It supports high power XFP and wavelength tunable DWDM XFP transceivers and eliminates the requirement of external programming equipment while the wavelength of the tunable transceiver can be programmed and saved to save cost.
10G media converter is available in unmanaged standalone unit, or management chassis plug-in module.

10G ETHERNET MEDIA CONVERTER

10G Ethernet media converter Features:

–Support Jumbo Frame

–Transparent Transport and very low delay

–Support ITUT prescribed DWDM/CWDM wavelength

–Support DMI function for XFP/SFP+ fiber module

–Support Loopback test function

–Economic In-band Management function

–powerful Network Management function（Web，SNMP，Console）

–Support hot plugging

–Support 2U Rack (16 channel) and standalone use

–Full State Led display

–Easy installation

–UTP cable length detection（only RJ45 interface）

Technical Details:

Transmission Speed: 10G
Protocols: IEEE802.3an(10Gbased-T, IEEE802.3ae(10Gbase-SR/LR/ER/ZR)
Access Type: 10G LAN
Interface Type: RJ45 To/From SFP+ / RJ45 To/From XFP

Transmission Distance:
–SFP+ module: Up to 80KM
–XFP module: up to 80km
–10Gbase-T: 100meters Cat .6a cable

Network management information:
–Card type information
–SFP+ fiber module detection
–SFP+ fiber module DMI function (Temperature,Voltage, Optical power )
— Link status detector
— Enable/Disabled Loopback test function
–UTP cable length detection (only RJ45 interface)
–Remote card’s status monitor (only in pairs)

Power Requirement
–Rack-mountable : AC 85 ~220V OR DC -48V
–Standalone: AC 220V OR DC -48V

Maximum Packet Forwarding Rate:14,880,950/S
Power consumption: ≤9W
Operating Temp: 0~ 50 ℃
Storage Temp:-10~ 70 ℃
Humidity: 5%~90% ( non-condensing)
Dimension Card: 11.5mm(W) × 78mm(D)
Standalone: 156mm × 128mm × 32mm(W*D*H)

Model Information:

10G SFP MEDIA CONVERTER STANDALONE (module SFP+ is optional)

10G SFP MEDIA CONVERTER CARD(module SFP+ is optional)

10G XFP MEDIA CONVERTER STANDALONE (XFP module can be configurated)

10G XFP MEDIA CONVERTER CARD (XFP module can be configurated

Other Products

Get in Touch

Contact Us

Share Us

© Copyright 2016 Fiber Zip. All Rights Reserved. Site Development By Xiranst